BabyDan Extend A Safety Gate with 1 Extension, Black

You can use the Extend A Gate extension to extend your pressure fit safety gate if it is too short to cover an opening in the home. All BabyDan pressure fit safety gates can be fitted with at least 1 extension. Each extension increases the width by approximately 7 cm. Everything you need is in the box - even if your safety gate must be fitted with wall cups. If you have a BabyDan Premier, BabyDan Avantgarde, BabyDan ASTA or BabyDan TORA you can extend the safety gate with up to 3 extensions on each side of the door. It is important that you always use wall cups when you’re using more than 2 extensions. If you have a BabyDan Danamic, BabyDan DesignerGate or a BabyDan MAJA you can extend the safety gate with up to 3 extensions. It is important that you always use wall cups when using more than 1 extension.

Find the product at our resellers, which you can find at babydan.com/about-babydan/find-resellers-and-distributors

BabyDan Extend A Safety Gate with 1 Extension, Black

Specifications

Height

73 cm / 28.74"

Width

7 cm / 2.76"

Depth

3 cm / 1.18"

Material

PE (Polyethylene) and powder coated steel

Color

Black

Item Number

# 500177

Safety Standard

EN 1930 : 2011

Warnings

Important! Read and follow these instructions carefully and keep for future reference
Always assemble, mount and use according to the instruction for use
BabyDan Premier & BabyDan Avantgarde: Do not extend with more than 6 extensions. Warning: Never use without wall cups when using more than 2 extensions
BabyDan Danamic & BabyDan DesignerGate: Do not extend with more than 3 extensions. Warning: Never use without wall cups when using more than 1 extension
BabyDan Two Way Auto Close: Do not extend with more than 4 extensions. Warning: Never use 3 extensions at the “handle side”. Warning: Never use without wall cups. Always use the wall cups supplied with the barrier
Place either adhesive pads between wall cups and wall/door frame or screw in wall cups according to markings
Important: If using adhesive pads, clean the surface with Isopropyl Alcohol before attaching the pads onto the surface. Do not clean with anything containing oil or soap
Important: Adhesive pads can only be used on smooth surfaces such as pained, lacquered or planed wood or smooth metal surfaces. Adhesive pads cannot be used on glass, brick wall, tapestry, wallpaper or other loose surfaces/materials
Important: The screws provided are only intended for fixing into wood. If fixing into other material, use appropriate screws and wallplugs (4 mm in diameter)
If mounting onto brick, drywall or other dissimilar surfaces, it may be necessary to mount a smooth surface such as a wooden batten on to the wall
Extend A Gate is made from metal
Only use original spare parts for this product

Features

  • Extend A Gate extension
  • Used for extending a pressure fit safety gate
  • Each extension increases the width by approximately 7 cm
  • Everything you need is in the box
keyboard_arrow_up