Important! Read and follow these instructions carefully and keep for future reference
Fits openings: inside doorframe: 90-146 cm (35.5’’-57.4’’)
Warning: Incorrect installation can be dangerous
Warning: Do not use the safety barrier if any components are damaged or missing
Warning: The safety barrier must not be fitted across windows
Warning: Never use without wall fittings
When used as a fire sound, always place the gate minimum 75 cm (29.6’’) away from the source of heart/fire and minimum 90 cm (35.5’’) from open fire
Since every fireplace/wood burning stove reaches different temperatures, the placing on page 2 is only intended as a guide line. Test your own unit at maximum heat output before placing the gate. If the gate is hot to touch, move the gate further from heat source than the recommended minimum distance
Should it not be possible to keep the recommended distances, separate sections are available at your supplier
Be aware of hazards associated with children using or climbing over the safety barrier. Never climb over the gate. Never allow children to swing on the gate
This safety barrier is for domestic use only
When fitted as instructed, between two clean structurally sound surfaces, this product conforms to EN 1930:2011
Always place the gate directly on the floor
If the safety barrier is used at the top of the stairs, it should not be positioned below the top level
If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible
The gate must be placed as far away from the stairs that the child will not be able to reach the bottom stair and crawl over the gate. Please note that this product not necessarily prevents accidents to happen. Never leave your child unattended
This gate is designed for children up to 24 months. However, this guidance should be constantly monitored against your child’s own development, as individual children’s skills do develop at different ages
Important: the screws provided are only intended for fixing into wood. If fixing into other material, use appropriate screws and wall plugs
If mounting onto brick, drywall or other dissimilar surfaces, it may be necessary to mount a smooth surface such as a wooden batten on to the wall
If the gate is damaged or has been exposed to an accident it must not be used again
Only use original spare parts for this product
The safety barrier has a manual closing system
Always check that the safety barrier is correctly closed and locked
The safety barrier should be checked regularly to ensure that it is secure and functioning in accordance with these instructions
This safety gate is made from metal
Only clean using warm soapy water, or a damp cloth. Do not use abrasive cleaners or bleach
If using outdoors, and to help prevent rust, treat all exposed metal on the gate with a rust inhibitor. Some rusting may still occur